Download MSDS
Standard: 2 1/4"
Medium: 2 7/8"
Large: 3 1/2"
Download MSDS
Configuration of louvers directs passage of water from cavity to outside of building, while inhibiting reverse passage of water.
Download MSDS
Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other debris. Quadro-Vent allows passage of moisture up to its 2 1/2" height, important in the event of mortar droppings at bottom of the cavity.
Download MSDS
The VS series is a complete line of polyvinyl chloride control joints suitable for various wall conditions. The PVC material conforms to ASTM D 2287 (Type PVC 654-4) with a durometer hardness of 85 (+ or - 5) when tested in conformance with ASTM D 2240.
Download MSDS
For placing horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint. Also prevents clogging of expansion joint with mortar.
Download MSDS
The Mortar Net is manufactured of high density polyethylene (HDPE) or nylon strands woven into a 90% open mesh. It will not react with common building products including PVC, polystyrenes, copper, rubberized-asphalt, lead, stainless steel or galvanized metal. It will not absorb or trap moisture, will not support mold or fungus, and is inedible to insects. It will not degrade as a result of temperature variations and is designed to last for the life of the building.
Download MSDS
Isolates flow of grout in designated areas requiring reinforced concrete block. Allows for greater bonding of masonry anchor in hollow block construction.
Download MSDS
Mortar Mitt is manufactured of high density polyethylene (HDPE) or nylon strands woven into a 90% open mesh. It will not react with common building products including PVC, polystyrenes, copper, rubberized-asphalt, lead, stainless steel or galvanized metal. It will not absorb or trap moisture, will not support mold or fungus, and is inedible to insects. It will not degrade as a result of temperature variations and is designed to last for the life of the building.
Download MSDS
Wire Diameter:
9 Gauge (.148" or W1.7)
Download MSDS
Wire Diameter:
9 Gauge (.148" or W1.7)
Download MSDS
Used at top of flashing to secure it to backup.
Download MSDS
Advantages:
The superior qualities of copper are combined with a tough sheet of heavy creped kraft paper asphalt bonded to protect the copper during installation. This economical solution provides a permanent waterproofing solution that is easily formed at the job site.
EF-Fortless is a truly remarkable soap solution that melts away powdery efflorescence and haze from clean-up efflorescence, and helps to control its return. This product is mildly acidic and perfect for use on color sensitive surfaces, since it will not discolor brick, block or mortar. It can be used on slurry-dyed block and similar substrates. Simply apply EF-Fortless undiluted and wait for the foam to collapse. Reapply as needed until there is no foaming on contact. With EF-Fortless only, the product does not need to be rinsed from vertical surfaces (option). When used on horizontal surface it must be rinsed When using a sealer, rinse to remove any chemical residue that was not absorbed.
OneRestore® is a breakthrough product that provides remarkable versatility, cleaning power and safety all in one. Capable of removing the deepest stains from virtually any surface, it is also used to safely restore glass and anodized aluminum.
OneRestore® can remove practically any metal oxide stain (including copper stains) and can be an effective coating remover. Safe on most surfaces and for use around people, OneRestore® is a great choice for cleaning and restoring colleges, schools, hospitals, government facilities and offices.
NMD 80 is a powerful detergent-based solution designed for safe and effective removal of efflorescence and mortar smears from masonry surfaces. It can be used on all masonry substrates including brick, stone, synthetic stone, pre-cast concrete, designer or colored block. Works great to remove polymeric sand haze. The added buffering ingredients allow NMD 80 to be powerful yet safe enough for glass and anodized aluminum. NMD 80 requires no respirator when working outdoors, preventing unnecessary fines. This product is capable of extremely effective cleaning and efflorescence removal without brushing or scrubbing and will leave the cream on the mortar joints.
Miscellaneous Masonry Accessories
Used to secure the position of rebar during concrete pouring.
Miscellaneous Masonry Accessories
Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8", 22 Gauge. Galvanized Steel.
Miscellaneous Masonry Accessories
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Hot Galvanized Steel. Comes with nuts and washers.
Big Foot Concrete Tube Form Base
Caraustar is a leading producer of fiber tubes used to form concrete columns, footings, piers and other structures. Caraustar KlimatePRO™ easy-POUR™ forms are engineered to provide outstanding performance under tough jobsite conditions and even in inclement weather. Produced using 100% Recycled Paperboard, our multiple manufacturing facilities located across the United States and Canada put us close to where you need us most.
Center hole (semi-square with round corners) enables roll to be quickly reversed for right or left hand use. Roll slips quickly onto the reel, yet easily rewinds.
Standard mushroom style rebar safety caps protect from protruding rebar at construction site. For bar #3 to #9.
These product designs can be used in most reinforced concrete applications.
