Download MSDS
Round plastic weep holes manufactured from Medium Density Polyethylene (white).
Download MSDS
Standard: 2 1/4"
Medium: 2 7/8"
Large: 3 1/2"
Download MSDS
Configuration of louvers directs passage of water from cavity to outside of building, while inhibiting reverse passage of water.
Download MSDS
Quadro-Vent's honeycomb design allows passage of moisture from cavity to the building exterior while restricting ingress of insects and other debris. Quadro-Vent allows passage of moisture up to its 2 1/2" height, important in the event of mortar droppings at bottom of the cavity.
Download MSDS
The VS series is a complete line of polyvinyl chloride control joints suitable for various wall conditions. The PVC material conforms to ASTM D 2287 (Type PVC 654-4) with a durometer hardness of 85 (+ or - 5) when tested in conformance with ASTM D 2240.
Download MSDS
For placing horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint. Also prevents clogging of expansion joint with mortar.
Download MSDS
The Mortar Net is manufactured of high density polyethylene (HDPE) or nylon strands woven into a 90% open mesh. It will not react with common building products including PVC, polystyrenes, copper, rubberized-asphalt, lead, stainless steel or galvanized metal. It will not absorb or trap moisture, will not support mold or fungus, and is inedible to insects. It will not degrade as a result of temperature variations and is designed to last for the life of the building.
Download MSDS
Isolates flow of grout in designated areas requiring reinforced concrete block. Allows for greater bonding of masonry anchor in hollow block construction.
Download MSDS
Mortar Mitt is manufactured of high density polyethylene (HDPE) or nylon strands woven into a 90% open mesh. It will not react with common building products including PVC, polystyrenes, copper, rubberized-asphalt, lead, stainless steel or galvanized metal. It will not absorb or trap moisture, will not support mold or fungus, and is inedible to insects. It will not degrade as a result of temperature variations and is designed to last for the life of the building.
Download MSDS
Wire Diameter:
9 Gauge (.148" or W1.7)
Download MSDS
Wire Diameter:
9 Gauge (.148" or W1.7)
Download MSDS
Used at top of flashing to secure it to backup.
Download MSDS
Advantages:
The superior qualities of copper are combined with a tough sheet of heavy creped kraft paper asphalt bonded to protect the copper during installation. This economical solution provides a permanent waterproofing solution that is easily formed at the job site.